全國統一熱線：021-32205893
SITEMA夾緊頭,SITEMA上海授權代理商
SITEMA夾緊頭用一個夾緊頭保持扭矩和軸向力
在特定的應用中，可能需要同時保持較高的軸向力和扭矩。
對于氣動操作，我們的鎖定單元系列KFPD滿足了這一要求。根據尺寸的不同，12 kN / 120 Nm或30 kN / 500 Nm的力/轉矩可以牢固地保持住。
“正常”SITEMA鎖定單元KFH已經能夠保持較小的扭矩。例如：280Nm，同時在桿直徑56上具有100kN的軸向保持力。
如果需要更高的扭矩，SITEMA的特殊設計系列KFHD可以提供幫助。采用這種設計，與標準KFH裝置相比，可以保持10倍的扭矩。例如：2800牛米，同時在桿直徑56上具有100千牛的軸向保持力。
無論是氣動還是液壓，應用都局限于靜態保持。 KFPD和KFHD可以防止旋轉啟動，但不適合制動旋轉質量。
SITEMA夾緊頭,SITEMA上海授權代理商
In particular applications, it can be necessary to hold high axial forces and torque at the same time.
For pneumatic operation, our Locking Unit series KFPD meets this demand. Depending in the size, forces / torques of 12 kN / 120 Nm or 30 kN / 500 Nm can be held securely.
The “normal” SITEMA Locking Units KFH are already able to hold smaller torque. Example: 280 Nm with, at the same time, an axial holding force of 100 kN on rod diameter 56.
In case higher torque needs to be held, SITEMA’s special design series KFHD can help. With this design, it is possible to hold torque with a factor of 10 higher compared to the standard KFH unit. Example: 2800 Nm with, at the same time, an axial holding force of 100 kN on rod diameter 56.
Whether the operation is pneumatic or hydraulic, the application is limited to static holding. The KFPD and KFHD can prevent a rotation from starting, but are not suitable to brake rotating masses.
SITEMA夾緊頭,SITEMA上海授權代理商
|
||
|
||
 |
員_a.png)