IFM流量計-IFM流量傳感器工作原理
德國IFM流量計算程序
計算程序是計算流速，流量或管內直徑的工具。
首先在選擇框中點擊要計算的參數。這兩個自由參數然后自動準備作為輸入字段。
然后可以輸入兩個缺失參數的值，并通過下拉框添加合適的單位。
選擇框“在傳感器包含傳感器”：對于小直徑（<25mm），由于插入管道中的傳感器的位移，自由管道橫截面嚴重變化。因此，傳感器安裝深度的指示對于小直徑管道特別重要。傳感器端部面積的計算基于ifm型SI5000的直徑。安裝深度由管道內部。這是約。 12毫米。然而，對于特殊的T形件或適配器，這個尺寸可以改變。
對于管內直徑，請參考附表“根據DIN2440的螺紋管”。點擊標記的鏈接可以打開一個單獨的窗口。
在輸入所有必要的值后，程序?qū)⑼ㄟ^點擊“計算”按鈕開始。
結果用所有參數和單位表示。
指示更改的參數并按下“計算”按鈕后，可以開始新的計算
IFM流量計-IFM流量傳感器工作原理

Flow sensors / flow meters

• For liquids and gases
• Versions for the use in hygienic applications
• Variable process connection using adapters
• Flow monitoring also for aggressive media

  Program for flow calculation

  Program description

  The calculation program is a tool to calculate flow velocity, flow rate or inside pipe diameter.

• First click on the parameter to be calculated in the selection box. The two free parameters are then automatically prepared as input field.
• You can then enter the values for the two missing parameters and add the suitable unit via a drop-down box.
• Selection box "Include sensor in the calculation tip": For small diameters (<25mm) the free pipe cross-section changes critically as a result of the displacement of the sensor tip which is inserted into the pipe. The indication of the installation depth of the sensor is therefore specially important for small pipe diameters. The calculation of the area of the sensor tip is based on the diameter of the ifm type SI5000. The installation depth is specified from the pipe inside. This is approx. 12 mm. This size can however change for special T-pieces or adapters.
• For the inside pipe diameter please refer to the enclosed list "threaded pipe according to DIN2440". A click on the marked link opens a separate window with this table.
• After all necessary values have been entered the program starts by clicking on the button "calculate".
• The results are indicated in a table with all parameters and units.
• You can start a new calculation after indicating the changed parameters and pressing the button "calculate".

IFM流量計-IFM流量傳感器工作原理